Technical information, Wall mounting | Panasonic KX-TCD430E guide

Useful Information

Technical information

Standard: DECT (Digital Enhanced

Cordless Telecommunications),

GAP (Generic Access Profile)

Number of channels: 120 Duplex

Channels

Frequency range: 1.88 GHz to 1.9 GHz

Duplex procedure: TDMA (Time Division Multiple Access)

Channel spacing: 1728 kHz

Bit rate: 1152 kbit/s

Modulation: GFSK (Gaussian Frequency Shift Keying)

RF Transmission Power: Approx. 250 mW

Voice coding: ADPCM 32 kbit/s

Power source: AC adaptor 220–240 V, 50 Hz

Power consumption, Base unit: Standby:

Approx. 3.5 W, Maximum: Approx. 9.2 W

Operating conditions: 5 °C–40 °C, 20 %– 80 % relative air humidity (dry)

Dimensions, Base unit: Approx. 58 mm x

128 mm x 105 mm

Dimensions, Handset: Approx. 143 mm x

48 mm x 32 mm

Mass (weight), Base unit: Approx. 170 g

Mass (weight), Handset: Approx. 120 g

Note:

LSpecifications are subject to change. LThe illustrations used in these operating

instructions may differ slightly from the actual product.

Wall mounting

8 cm

Screws

Hooks

Note:

LMake sure the screws are securely fastened to the wall.

LUse the following wall template to position the screws before drilling.

8 cm

Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333

29

Image 29

Panasonic KX-TCD430E operating instructions Technical information, Wall mounting

Contents

Operating Instructions Index Included accessories Accessory informationAdditional/replacement accessories Model No Description Sales and Support Information Important information Handset Location of controlsBase unit Receiver Display Phonebook D C Talk Navigator Connections Battery installation Battery charge Setting the time and date Battery replacementTurning the power on/off Making calls Redial featureOther features Handset locator Answering calls Storing phone numbers and names PhonebookEditing a stored entry Erasing a stored entry Making calls using a hot key Making calls using the phonebookHot key quick dial Assigning an entry in the phonebook to a hot key Editing a caller’s phone number before calling back Caller ID serviceViewing caller information and calling back Storing caller information into the phonebook Erasing caller information 2nd menu 3rd menu Default setting Guide to handset settings Ringer options Handset settingsTime alarm Example Selecting the talk mode display Selecting the standby mode displayTone options Display options Call options Setting call barSelecting the display language Storing the direct call number Other options Base unit settings Guide to base unit settingsAdjusting ringer volume Setting time break/earth recall Turning on/off call restriction Setting pause lengthSetting call restriction Cancelling a restricted number Resetting the base unit to its default settingsStoring emergency numbers Changing stored emergency numbers Registering a handset to a base unit Operating additional unitsAdditional handsets Additional base units Selecting a base unit Cancelling a handsetCancelling a base unit Setting the selected handsets to ring Setting all handsets to ring To transfer a call directly without speaking to handset Handset Troubleshooting Caller information is not displayed Handset beeps intermittently and/or 074 flashesFully charged the batteries, but 074 still flashes Wall mounting Technical information Conditions of guarantee Index For your future reference Dear PurchaserDeclaration of conformity Customer Care Helpline Tel. No. U.K 100 076 / R.O.I