8Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333
Preparation
Battery replacement
If 074 flashes even when the handset
batteries have been fully charged, both
batteries must be replaced.
Important:
LPlease use only the Panasonic batteries,
noted on page 3.
LUse only rechargeable batteries. If you
install non-rechargeable batteries and
start charging, the batteries may leak
electrolyte.
LDo not mix old and new batteries.
LUse only 2 nickel metal hydride (Ni-MH)
batteries or 2 nickel cadmium (Ni-Cd)
batteries. Do not mix battery types.
LEnsure that the correct battery type is
selected (page 19).
1Press the notch on the cover firmly and
slide it in the direction of the arrow.
2Remove the batteries positive (+)
terminal first. Replace both batteries. See
the battery installation on page 6.
Turning the power on/off
Power on
Press{ih} for abou t 1 second.
LThe display will change to the standby
mode.
Power off
Press{ih} for abou t 2 seconds.
LThe display will go blank.
Setting the time and date
Important:
LConfirm that the AC adaptor is connected.
LEnsure that w is not flashing.
1Press {j}.
2Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3Press {*}.
4Enter the current hour and minute by
selecting 2 digits for each (24-hour time
entry).
Example:15:1 5
Press {1}{5}{1}{5}.
LIf you make a mistake, press {C}.
Digits will be cleared from the right.
5Press {>}.
L“SETTING BS” will be displayed.
6Press {>}, then press {*} 2 times.
7Enter the current day, month and year by
selecting 2 digits for each.
Example:17 May, 2004
Press {1}{7}{0}{5}{0}{4}.
LIf you make a mistake, press {C}.
Digits will be cleared from the right.
8Press {>}.
L“SETTING BS” will be displayed.
9Press {ih}.
Note:
LIf a power failure occurs, set the time and
date again.