110
Before Requesting Help
Answering System
Problem Possible cause Solution Page
A beep sounds when
or on the
base unit is pressed.
•Another unit in use. •Wait for the other user to
complete the operation.
A beep sounds when
entering caller list or base
unit phonebook with
cordless handset.
•Another unit in use. •Wait for the other user to
complete the operation.
The unit picks up the wrong
voice tag. •Similar voice tag exists. •Record different voice
tag. p. 48
Problem Possible cause Solution Page
The answering system is
on, but incoming messages
are not recorded.
•The recording time is set
to “Greeting Only”.
•
Memory is full (30 minutes
or 64 messages).
•Select “1 Minute” or
“No Limit” (see
“Answering System”).
•Erase some or all of the
messages.
p. 89
p. 93
p. 95
Cannot operate the
answering system from a
touch tone phone.
•Incorrect remote code
entered.
•Tone are too short to
activate the unit.
•The answering system is
off.
•Enter the correct remote
code.
•Press each button firmly.
•Turn on the answering
system.
p . 9 9
p. 88
p. 98
Cannot operate the
answering system with the
unit.
•Someone is operating
the answering system. •Retry when other user
has finished operation.
While recording a greeting
message, the unit starts to
ring and stops recording.
•A call is being received. •Answer the call. Retry
recording after
conversation is finished.
During playback, the unit
starts to ring and stops
playback.
•A call is being received. •Answer the call. Retry
playback after
conversation is finished.