650bx engversion 19 6 02 19/6/02 6:59 am Page 9
Key Lock | Dialling Pause |
You can lock the handset dialling but- tons. Only incoming calls are accept- ed while the key lock is ON.
Turn Key Lock ON
Z and hold Y until a beep sounds.
‘Ó’ is displayed and all dialling buttons are locked.
!When the key lock is ON, emergency calls cannot be made until key lock is cancelled.
Turn Key Lock OFF
Z and hold Y until a beep sounds.
‘Ó’ disappears and key lock is can- celled.
The key lock is also cancelled if the handset is turned off.
Recall Feature
M is used to access special tele- phone services. Contact your Network provider for details.
If your unit is connected to a PBX, pressing M allows you to access some features of your host PBX such as transferring an extension call.
Temporary Tone Dialling
!This function is for Rotary or Pulse service users.
ZJ before entering access num- bers which require tone dialling.
The dialling mode is switched to tone. You can enter numbers for dialling which require tone dialling eg. elec- tronic banking service.
When you hang up, the mode will return to pulse.
!This function is for PBX line/long distance service users.
A dialling pause is used when a pause in the dialling of the phone number is necessary using a PBX or accessing a long distance service. (see “Select Pause Timing”).
For example, when 9 (line access number) is dialled followed by a pause to access an outside line through a PBX:
ZI.
ZX. (‘p’ is displayed on the LCD).
Enter telephone number.
Z‰.
Entering a pause prevents misdi- alling when you redial or dial a stored number.
Pressing X once creates one pause. To extend the pause requirement time, ZX accordingly.
Additional Features
9
