3. Placing Outside Calls
40 Issued April 2000 DBS-32-755
Checking SSD Numbers Using the Soft Keys
1. Scroll through the System Speed Dial directory until the desired SSD name
is displayed.
2. Pick up the handset or press ON/OFF.
3. Press
CONF.
4. Press the soft key next to the SSD entry. The SSD number appears on the
display.

Chaining Speed Dial Numbers

To handle phone numbers longer than 16 characters, you can chain SSD
codes to a PSD code. When you dial the PSD code, the system will dial each
SSD number contained in the chain.
Systems using DBS software version CPC-EX v. 1.0 or higher also
allow you to chain SSD codes to each other, and to chain PSD codes to
each other. (You cannot, however, chain PSD codes to an SSD code.)
A maximum of 16 characters, including other speed dial codes, can be
entered into a speed dial code.
Note: Before chaining, enter the parts of the phone number into one-touch or
soft keys, or into speed dial bins. For example, program the first part into one-
touch key #1, the second part into one-touch key #2, etc.
Complete the following steps to chain speed dial numbers:
1. Pick up the handset or press ON/OFF.
2. Press
PROG, AUTO.
3. Enter the speed dial code (or press the one-touch key if using a PSD
number) you are chaining the other codes to.
4. Press
AUTO and enter the speed dial code containing the first part of the
number to be dialed.
5. Repeat step 4 for each remaining speed dial code to be contained in the
chain.
6. Press
HOLD.