21
Useful Information
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Cause & Solution
• You are using the handset or base unit in an
area with high electrical interference. Place
the handset and base unit away from
interference sources, such as antennas and
mobile phones.
• The redialled number was more than 20
digits long. Redial the number manually.
• Make sure the charge contacts are not dirty
and the AC adaptor is connected properly,
then try again.
• Clean the charge contacts and charge again
(page 7,8).
• It is time to replace the batteries (page 6).
• Wipe the battery ends (+, –) and the unit
contacts with a dry cloth.
• You must subscribe to Caller ID service.
• Your unit is connected to a telephone line with
DSL service. We recommend connecting a
filter (contact your DSL service provider) to the
telephone line between the base unit and the
telephone line jack.
• When you answer the calls, the caller
information will not be left in the call log.
• Reset has failed. Please try again (page 11).
• If you reset to default, the numbers in the
phonebook and redial list are cleared.
• If you have changed PIN but forgot it, please
contact your nearest Panasonic Service
Centre for help.
• Caller information has been received (page 15).
Problem
Noise is heard during a call.
Pressing [ ] does not display/
dial the last number dialled.
I tried to charge the batteries, but
they do not charge at all.
I charged the batteries for 10
hours, but still flashes.
I charged the batteries for 10
hours, but the operating time
seems to be short.
Caller information is not displayed.
I reset the handset but a long beep
is heard and the display returns to
telephone setting mode.
I found the numbers stored in the
phonebook and in the redial list
are cleared.
I cannot enter the PIN.
-CALL- is displayed.