For assistance, please call: 1-800-211-PANA(7262)
41
Listening to Messages
Answering System
Using the Handset (Remote Operation)
To play back messages
*If you press
[STOP]
on the base unit during message playback, operation is
stopped.
To resume the playback, press
[MESSAGE/SLOW TALK]
on the base unit within
15 seconds, or the voice menu will start (see below).
•If noise interferes with the message playback:
—during playback using
[]
, press
[]
(Channel).
—during playback using
[]
, press
[]
(Channel).
The unit selects a clearer channel.
•At the end of the last message, “
End of final message
” is heard. The unit will
announce the remaining recording time if it is less than 3 minutes.
•If the unit starts to ring during the remote operation, press
[]
or
[]
to answer
the call. To playback, start again from the beginning after hanging up.
•If you hear “
Memory full
” after playback, erase unnecessary messages (p. 43).
Voice menu
If you do not press any buttons at the end of the last message, the unit will
announce “
End of final message
” and the voice menu will begin.
The unit announces, “
Press 4 to play back new messages. Press 5 to play back all
messages
.”
•You can press buttons for other options (p. 42) even if the voice menu has started.
•If you do not press any buttons within 10 seconds, the handset will exit remote
operation.
1
Press
[MENU]
.
2
Scroll to “
Message play
” by pressing
[]
or
[]
, then press
Select
.
•The unit announces the number of new messages
and only new messages are played back.
•The messages will be heard from the speaker. To
switch to the receiver, press
[]
. To switch back
to the speaker, press
[]
.
•
[MESSAGE/SLOW TALK]
,
[REPEAT]
,
[SKIP]
and
[STOP]
* can also be used during playback
(p. 42).
•
When you have no new messages,
the unit
announces “
No new messages. All message playback
”
and plays back all messages.
•
When you have no messages,
the unit
announces