Troubleshooting
54
Previously programmed
information is erased.
If a power failure occurs, programmed
information may be erased. Reprogram if
necessary.
Recharge battery
is
displayed, “” ashes or
the unit beeps intermittently.
Charge the battery fully (p. 8).
You charged the battery fully,
but
Recharge battery
is
still displayed and/or “”
continues to ash.
Clean the charge contacts and charge again
(p. 9).
Install a new battery (p. 8).
The IN USE/CHARGE
indicator light does not go out
after the battery has been
charged.
This is normal.
If you cannot solve your
problem
Call our customer call center at
1-800-211-PANA(7262).
Panasonics e-mail address for customer
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY
When you try to download
phone book data or
information from openLCR,
the voice prompt is not
announced from the handset
while
Listen & follow
phone guidance.
is being
displayed.
Check the settings (p. 89).
If you cannot solve a problem, consult
openLCR (see below).
For more information about
Caller IQ
Call openLCRs customer service department
at 1-866-openLCR (1-866-673-6527).
openLCRs web site:www.openLCR.com
Problem Cause & Remedy