Panasonic KX-TG2382PW, KX-TG2382B, KX-TG2383B, KX-TG2383S Direct Remote Operation

Direct Remote Operation

Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. To end the remote operation, hang up anytime.

Direct commands

(4)	NEW MESSAGE PLAYBACK	(*)(4)	ERASING A SPECIFIC
	•Only new messages are		MESSAGE
	played back.		(During playback)
(5)	ALL MESSAGE PLAYBACK		•The current message is
			erased.
	•All messages are played back.
			•A short beep will sound
(1)
	REPEAT (During playback)		and the next message will
	•The current message is		be played.
	repeated.	(*)(5) •All recorded messages are
	of playback, the previous
	•If you press within 5 seconds		ERASING ALL MESSAGES
	message will be played.		erased.
(2)	SKIP (During playback)		•A long beep sounds, and
			“No messages” is heard.
	•The current message is
	skipped. The next message is	(0)	ANSWERING SYSTEM OFF
	played.
			•The unit hangs up and will
(9)	STOP		not answer calls until
			turned on again
	•Operation is stopped		(p. 49, 53, see below).
	temporarily.
	•To resume operation, enter a
	direct command within 15
	seconds, or the voice menu
	will start (p. 56).

Turning on the Answering System

Call your unit and wait for 15 rings.

•The unit will answer and the greeting message will be played.

•The Answering System will be turned on. Hang up or enter the remote code for other options.

•When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options.

Skipping the greeting message

After calling your unit, press (*) during the greeting message.

•The unit skips the rest of the greeting message and you can start recording your message after the long beep.

Answering System

For assistance, please call: 1-800-211-PANA(7262) 57