Preparing the Answering System
24
Number of Rings
You can select the number of times the unit rings before the Answering
System answers a call, from “2” to “7” or “Toll saver”*. The Answering
System needs to be on. Your phone comes from the factory set to “4”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1Press (MUTE/FUNCTION).
2Scroll to “Initial set” by pressing Öor
Ñ, and press á.
3Scroll to “Set answering” by pressing Ö
or Ñ.
4Press á.
5Press áat “No. of rings”.
•The current setting is displayed.
6Select the number of rings by pressing Ö
or Ñ.
•You can also select the number of rings by
pressing (0) (Toll saver*), or (2) to (7).
7Press á(Save key).
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
*Toll saver
When you call the unit from outside:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
Date and time
H
Initial set
--------------
Set tel line
H
Set answering
HS register
--------------
H
No. of rings
Recording time
Number of rings
:4
GF H
=Save
Number of rings
:Toll saver
GF H
=Save