Installation Warning Statements

This section includes the basic installation warning statements.

Warning

Warning

Warning

Warning

Warning

Warning

To prevent the switch from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 113°F (45°C). To prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings. Statement 17B

This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Statement 39

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

If a redundant power system (RPS) is not connected to the switch, install an RPS connector cover on the back of the switch. Statement 265

Class 1 laser product. Statement 1008

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006

10

Page 10
Image 10
Cisco Systems Catalyst 3550 warranty Installation Warning Statements