Voice Mail Service
Using Voice Mail service
Voice Mail is an automatic answering service offered by your telephone company. If you subscribe to this service, your telephone company’s Voice Mail system can answer calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by the telephone company, not your telephone.
Note:
LPlease contact your telephone company for details and availability of this service in your area.
Storing the Voice Mail (VM) access number
In order to listen to your Voice Mail messages (page 29), you must dial your telephone company’s Voice Mail access number. Once you have stored your Voice Mail access number, you can dial it automatically by pressing {VM} (page 29).
1
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3 Scroll to “Voice Mail” by pressing {V} or {^}, then press {>}.
4 Scroll to “Store VM access#” by pressing {V} or {^}, then press {>}.
5 Enter your access number (max. 32 digits).
LTo correct a digit, press {>} or {<} to move the cursor, then press {CLEAR}. Enter the correct number.
LIf a pause is required when dialing, press {PAUSE} where needed (page 19).
6 Press {Save}, then press {OFF}.
Note:
LWhen storing your Voice Mail access number and your mailbox password, press {PAUSE} to add pauses (page
19)between the access number and the password as necessary. Consult your telephone company for the required pause time.
Example:
| PPPP |
| 8888 |
| ||||
|
|
|
|
|
| |||
VM access | Pauses | Password | ||||||
number |
|
|
|
|
|
|
| |
To erase the Voice Mail access number Repeat steps 1 to 4, then press and hold {CLEAR} until all digits are erased. Press {Save}, then press {OFF}.
Voice Mail (VM) Tone Detection
Your telephone company sends special signals (sometimes called “Voice Mail tones” or “stutter tones”) to the unit to let you know you have new Voice Mail messages. If you hear a series of dial tones followed by a continuous dial tone after you press {C} or {s}, you have new Voice Mail messages. Minutes after you hang up a call or after the phone stops ringing, your unit will check the phone line to see if new Voice Mail messages have been recorded. The default setting is ON. Turn this feature off when:
–You do not subscribe to Voice Mail service.
–Your telephone company does not send Voice Mail tones.
–Your phone is connected to a PBX.
If you are not sure which setting is required, consult your telephone company.
Turning VM detection on/off
1 Press {MENU}.
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
28For assistance, please call
