TG5831_5832AL.book Page 34 Monday, March 14, 2005 4:28 PM
Programmable Settings
Handset ringer tone
You can change the ringer tone heard when an outside call is received. There are 3 tones and 4 melodies. The default setting is “Tone 1”.
1 Press {MENU}.
2 Scroll to “Ringer setting” by pressing {V} or {^}, then press {>}.
Ringer setting
3 Scroll to “Ringer tone” by pressing {V} or {^}, then press {>}.
Ringer tone
4 Press {V} or {^} repeatedly to select the desired setting.
Ringer tone 1=Tone 1
KBack dB SaveL
L You can also select the ringer tone by pressing {1} to {7}.
L If the ringer volume has been turned off, the handset will not ring.
5 Press {Save}, then press {OFF}.
Note:
L If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if:
–the caller hangs up before you answer the call.
–another person answers the call using another phone connected on the same line.
Handset interrupt tone
This tone lets you know when you receive a call while you are on an intercom call (page 29).
“2” (default): The tone will sound 2 times.
“On”: The tone will sound for as long as the line rings.
“Off”: Turns this feature off.
1 Press {MENU}.
2 Scroll to “Ringer setting” by pressing {V} or {^}, then press {>}.
3 Scroll to “Interrupt tone” by pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select the desired setting.
5 Press {Save}, then press {OFF}.
34
