Useful Information
44
*1KX-TG6521
*2KX-TG6512/KX-TG6513
Noise is heard, sound cuts in
and out.
LYou are using the handset or base unit in an
area with high electrical interference. Re-
position the base unit and use the handset
away from sources of interference.
LMove closer to the base unit.
LIf you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
LUnplug the base unit’s AC adaptor to reset the
unit and turn off the handset. Reconnect the
adaptor, turn on the handset and try again.
The handset does not ring. LThe ringer volume is turned off. Adjust ringer
volume (page 23).
The base unit does not ring.*1 LThe ringer volume is turned off. Adjust ringer
volume (page 23).
I cannot make a call. LThe dialling mode may be set incorrectly.
Change the setting (page 14).
LThe handset is too far from the base unit.
Move closer and try again.
LAnother unit is in use. Wait and try again
later.*2
LAnswering system is being used.*1 Wait and
try again later.
LThe key lock feature is turned on. Turn it off
(page 28).
Problem Cause/solution
TG55xx_65xxBX(e).book Page 44 Friday, April 15, 2011 2:35 PM