Useful Information
45
Caller ID
Answering system (KX-TG6521)
Problem Cause/solution
Caller information is not
displayed.
LYou must subscribe to a Caller ID service.
Contact your service provider/telephone
company for details.
LIf your unit is connected to any additional
telephone equipment, remove and plug the
unit directly into the wall jack.
LIf you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
LOther telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
Caller information is slow to
display.
LDepending on your service provider/
telephone company, the unit may display the
caller’s information at the 2nd ring or later.
LMove closer to the base unit.
Time on the unit has shifted. LIncorrect time information from incoming
Caller ID changes the time. Set the time
adjustment to “Manual” (off) (page 23).
The name stored in the
phonebook is not fully
displayed while an outside call
is being received.
LEdit the phonebook entry name to fit in 1 line
of text (page 19).
Problem Cause/solution
My own greeting message
cannot be properly heard.
LRecord your own greeting message again
(page 32).
I cannot operate the answering
system.
LSomeone is using the unit. Wait for the other
user to finish.
LA caller is leaving a message. Wait for the
caller to finish.
LThe handset is too far from the base unit.
Move closer.
TG55xx_65xxBX(e).book Page 45 Friday, April 15, 2011 2:35 PM