Fujitsu Siemens Computers V2020 manual Battery, Monitor settings, Setting the desktop area

Models: V2020

1 60
Download 60 pages 35.35 Kb
Page 31
Image 31
Monitor settings

Using your notebook

Monitor settings

Setting the desktop area

The screen resolution of the LCD monitor of your notebook is optimally set at the factory.

Changing the font size

Under Start - Control Panel - Appearance and Themes - Display - Advanced you can choose between a larger and a smaller font in the Font size field.

Synchronising the display on the LCD screen and an external monitor

Your notebook supports the simultaneous display on the LCD screen and an external monitor. Pressing the key combination Fn + F4 switches between LCD only, external monitor and LCD and external monitor only. The last setting is useful if you would like high resolution and refresh rate on an external monitor.

Battery

The battery is one of the most important components of your notebook. When not plugged into a mains outlet, the notebook runs on its built-in battery. You can increase the life of the battery by caring for the battery properly. The average battery life is around 500 charge/discharge cycles.

You can extend the battery life by taking advantage of the available energy saving functions.

!

Only use batteries approved by Fujitsu Siemens Computers for your notebook.

Take care not to drop the batteries or otherwise damage their casing (fire risk).

If the rechargeable batteries develop a fault please stop using them immediately. Do not touch the contacts of the batteries.

Never interconnect the positive and negative terminals of a battery.

Batteries are harmful to the environment. You should dispose of them following guidance from your local District Council.

Observe the information on battery storage in the "Important notes" chapter.

Charging, caring for and maintaining the battery

The notebook battery can only be charged, when the ambient temperature is between 5 °C and max. 35 °C.

You can charge the battery by connecting the notebook to the power adapter (see "Connecting the power adapter").

You can maintain long life from your battery by allowing it to discharge fully before you recharge it again. To do this, leave your notebook turned on when it is operated with the battery. Once the battery is running low you will hear a warning alarm. If you do not connect the mains adapter within five minutes of the warning alarm described above, your notebook will automatically switch off.

Information on the battery charging time is contained in the "Technical data" chapter.

Monitoring the battery charging level

Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When you place the mouse pointer on the battery symbol, the system displays the battery status.

A26391-V2020-Z120-1-7619, edition 1

23

Page 31
Image 31
Fujitsu Siemens Computers V2020 manual Battery, Monitor settings, Charging, caring for and maintaining the battery