Panasonic KX-TG7123E, KX-TG7100 Base unit settings, Call Options Recall/Flash, Repeater Mode

TG7100-7120E(e).book Page 19 Tuesday, July 4, 2006 3:29 PM

Base Unit Settings

Base unit settings

L Use the handset to customise the base unit.

L When customising the base unit, the current item or setting is indicated by >.

To customise the base unit:

1{j/OK}

2Press {^} or {V} to select “Base Unit Setup”. i {>}

3Press {^} or {V} to select the desired item in the base unit settings menu. i {>}

4Press {^} or {V} to select the desired item in the sub-menu. i {>}

5Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the “Feature” column of the chart.

L To exit the operation, press {ih}.

Base unit settings	Sub-menu	Feature (default setting)
menu
Ringer Volume	—	Base unit ringer volume (Medium)
Call Options	Recall/Flash	Change the recall time (“100 msec.”).*1
	Call Restrict	page 20
Other Options	Base Unit PIN	Change base unit PIN (“0000”).*2
		– Enter the current 4-digit base unit PIN.*3
		i Enter the new 4-digit base unit PIN.
		i {j/OK}
	Repeater Mode	(“Off”): page 29

*1 Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX.

*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.

*3 If you forget your PIN, see page 35.

Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 19