Panasonic KXTG7623B, KX-TG7624SK, KXTG7622B operating instructions For your safety

Important Information

For your safety

To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.

WARNING

Power connection

RUse only the power source marked on the product.

RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.

RRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

RUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at

1-800-211-PANA (1-800-211-7262).

RUnplug from power outlets and never touch the inside of the product if its casing has been broken open.

RNever touch the plug with wet hands. Danger of electric shock exists.

Installation

RTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.

RDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

RDo not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects.

Operating safeguards

RUnplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.

RDo not disassemble the product.

RDo not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use.

Medical

RConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).)

RDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

CAUTION

Installation and location

RNever install telephone wiring during an electrical storm.

RNever install telephone line jacks in wet locations unless the jack is specifically designed for wet locations.

RNever touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

RUse caution when installing or modifying telephone lines.

RThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.

RThis product is unable to make calls when:

–the handset batteries need recharging or have failed.

–there is a power failure.

Battery

RWe recommend using the batteries noted on page 5. USE ONLY rechargeable

Ni-MH batteries AAA (R03) size.

RDo not mix old and new batteries.

For assistance, please visit http://www.panasonic.com/help 7