Breville BEM800 Motor Head Safety Cut-Off, Electronic Protection CUT-OFF - Current Overload

ASSEMBLY & OPERATION

MOTOR HEAD SAFETY CUT-OFF

The mixer is equipped with a motor head safety cut-off. If the motor head is lifted at any time while the mixer motor is switched on, the safety cut-off will automatically switch the mixer off.

To restart the mixer turn the speed control dial to the "Off" position and close the motor head to the normal position and re-select the desired speed from the dial.

To turn the mixer off, turn the dial to the “Off” position, switch the appliance off at

the power outlet and unplug the cord.

Electronic Protection CUT-OFF – Current Overload

The mixer is equipped with an electric protection cut-off and will automatically stop operating if the motor is stalled or overloaded. This is normally a result of excessive ingredients being processed at one time. Should the mixer go into this mode, the LED indicator band will flash and the error message “E1” will flash on the LCD screen and the buzzer will “beep” 3 times.

If this error occurs, turn the speed control dial to the ‘Off” position, switch the appliance off at the power outlet and unplug the cord. Remove some of the ingredients in the mixing bowl and then restart the mixer.

Thermo CUT-OFF –

Temperature Overload

The mixer is equipped with a self-resetting safety device which safeguards against overheating the motor with excessive loads. If overheating occurs, the mixer will automatically activate the overheating protection device and the motor will switch itself off. Should the mixer go into this mode, the LED indicator band will flash and the error message “E2” will flash on the LCD screen and the buzzer will “beep” 3 times.

If this error occurs, turn the speed control dial to the ‘Off’ position, switch the appliance off at the power outlet and unplug the cord. Wait at least 15 minutes before restarting the mixer.

Disassembling the mixer

1.When mixing is complete, turn the speed control dial to the ‘Off/Stand by’ position, switch the appliance off at the power outlet and unplug the cord.

2.Remove splash guard if assembled. Separate pour spout then slide main ring out of position.

3.Raise the mixer motor head by depressing the tilt back button and lift the mixer motor head up until it tilts back and locks into the open position.

15