Breville BEM800 brochure The count-up timer, Assembly & Operation

ASSEMBLY & OPERATION

NOTE

If the mixer has not been used for 3 minutes it will automatically change from 'Stand by mode' to a power saving 'OFF mode' and the illuminated LED will switch off. To exit 'OFF mode' and begin mixing, turn the dial to the selected speed or press one of the count up/down timer buttons.

2.Add ingredients to the mixing bowl as indicated in the recipe.

Always begin mixing by selecting a low speed setting on the speed control dial. This will prevent ingredients splattering. Increase the speed as suited to the mixing task. The speed setting can be adjusted during operation by moving the dial clockwise for the main mixing settings. Use the mixing guide in this booklet as a reference.

If necessary, stop the mixer during operation and scrape any food mixture down the sides of the mixing bowl with a spatula.

NOTE

Always turn the Mixer off if you need to scrape the bowl during use, and then switch back on and continue mixing.

The count-up timer

The count-up timer is especially useful to gauge mixing time. You can monitor the time it takes to thoroughly mix the ingredients, so that the next time you mix the same ingredients you can set the count- down timer for the specific time.

The count-up timer will automatically begin counting up as soon as the dial is rotated from ‘Off’ to one of the speeds. When the dial is turned to "Pause" the total time will be displayed on the LCD and will flash. When the dial is turned to "OFF", the LCD display will reset back to "0:00".

13