CARE, CLEANING & STORAGE
Cleaning after use
1.Always ensure the speed control dial is in the ‘Off’ position, the mixer is switched off at the power outlet and the power cord is unplugged.
2.Remove the beater, dough hook or whisk attachment and mixing bowl from the mixer. Follow instructions in the ‘Assembly and operation’ section of this booklet.
3.Wipe the mixer motor head and mixer stand with a soft, damp cloth then dry thoroughly.
Wipe any excess food particles from the power cord. Wash the bowl, beater, dough hook, and whisk in warm soapy water with a soft cloth or they can be washed in the dishwasher. Rinse and dry thoroughly.
NOTE
Do not use abrasive scouring pads or cleaners when cleaning the mixing bowl, flat beater, dough hook or whisk as these may scratch the surface. Also ensure that the attachments are not soaked in water for extended periods of time, for example several hours or overnight, as this may damage the finish.
NOTE
Do not wash or immerse the mixer motor head and mixer base in water or any other liquid. Clean with a soft, damp cloth and dry thoroughly. Do not allow water or any liquid to enter the gear system as damage may result.
Scraper Beater
1.Wash the scraper beater in warm, soapy water using a soft cloth or a soft bristled brush. Rinse and dry thoroughly.
2.The Scraper Beater can also be washed in the dishwasher (top shelf only).
3.A small bottle brush can be used to clean inside the neck of the Scraper Beater if needed.
Storage
Your Breville Scraper Mixer Pro should be kept in a convenient position on your kitchen bench top or in an accessible cupboard.
Always ensure the speed control dial is in the ‘Off’ position, the mixer is switched off at the power point and the power cord is unplugged.
Store the mixing bowl in the bowl locking recess in the mixer Base.
Place the attachments inside the mixing bowl and lower the mixer motor head into the horizontal (closed) position.
The motor head cannot be taken off the base for any purpose.
19
