ASSEMBLY & OPERATION
Attaching the scraper beater,
FLAT BEATER, DOUGH HOOK OR WHISK to the mixer motor head
1.Ensure the mixer motor head is in the raised/open position. Align the groove in the top of the mixing attachment with the locking pin on the spindle extending down from the mixer motor head.
2.Push the attachment upwards and turn clockwise until it locks securely onto the locking pin on the spindle (see Fig. 1).
NOTE
When ingredients are in the mixing bowl, the scraper beater may make a slight noise as it scrapes the sides and bottom of the bowl. This is normal and should not cause concern.
Do not turn the mixer on with the scraper beater in place if the mixing bowl is empty. This will cause the scraper beater to make a loud noise as it scrapes the bowl.
Fig. 1
3.Lower the mixer motor head by depressing the tilt back button and gently pushing the mixer motor head down until it locks into the horizontal (closed) position (see Fig. 2).
Fig. 2
4.The splash guard can now be assembled if required. Slide the main ring into position on top of bowl, then assemble the pour spout.
Operating the mixer
Planetary Mixing Action
By replicating a similar mixing action used by commercial mixers in bakeries and patisseries, The Breville Scraper Mixer Pro head rotates around the bowl whilst rotating the beater in the opposite direction. This ensures a superior and thorough mixing result without the need for a rotating bowl.
1.Ensure the speed control dial is set to the ‘Off’ position, plug the cord into a
12
