Panasonic KX-TG9341 Erasing selected caller information, Erasing all caller information, Select

TG93XX_OI.book Page 33 Thursday, December 27, 2007 3:38 PM

Caller ID Service

–After the call is ended, the phone number of the caller, when reviewed from the Caller list, is displayed in the same Format as the Edited Number.

For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code.

To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically.

This feature can be turned on or off (page 25).

Note:

L Phone numbers from the 4 most recently edited area codes are automatically edited.

L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.

Erasing selected caller information

1{View CID}

2{V}/{^}: Select the desired entry.

3{Erase} i{Yes} i{OFF}

Erasing all caller information

1{View CID}

2{All erase} i{Yes}

Storing caller information into the phonebook

1{View CID}

2{V}/{^}: Select the desired entry. i{Select}

LTo edit the number, press {Edit} repeatedly until the phone number is shown in the desired format.

3{Save}

4{V}/{^}: “Phonebook” i

{Select}

L If there is name information for the caller, go to step 6.

5Enter the name (16 characters max.; page 21). i{Next} i{Save}

6{OFF}

For assistance, please visit http://www.panasonic.com/help 33