Preparation
Setting the DIP switches
DIP switches (Default position: ON)
ON
1 2 3
OFF*1
You can set the following functions by using the DIP switch 1 to 3. Slide each switch with a pointed object such as a pen as necessary.
After repositioning the DIP switches to your preferred settings, unplug the AC adaptor then reconnect it. The cordless camera is reset to these settings.
DIP switch | Function | ON (default) | OFF*1 |
1 | Image orientation | Standard | Upside down |
|
|
|
|
2 | Image quality | Standard quality mode | Enhanced motion |
|
|
| mode |
|
|
|
|
3 | Speaker volume | Standard | Low |
|
|
|
|
*1 Slide the switch to down.
Displaying the image upside down (DIP switch 1)
To turn the camera image upside down, set to OFF. This feature is useful when you mount the cordless camera upside down (page 18).
Selecting image quality (standard quality mode/enhanced motion mode) (DIP switch 2)
If you want enhanced motion, set to OFF (Enhanced motion mode). The image clarity decreases.
If you want to improve the image clarity, leave at ON (Standard quality mode). The motion becomes less enhanced.
Selecting the cordless camera speaker volume (DIP switch 3)
If you want to lower the speaker volume, set to OFF (LOW).
10For assistance, please visit http://www.panasonic.com/phonehelp
