ÒAutomatic Answering Operation
³If you do not want the unit to answer calls, press (ANSWERÐON) again to turn off the answering system. The ANSWER indicator light goes out and “Answer off ” is heard.
³You can also turn on the answering system remotely using any other phone (p. 29).
Monitoring incoming calls
While a call is being recorded, you can monitor it through the speaker.
To answer the call, lift the handset of the telephone connected to the same line. The unit stops recording.
³You can adjust the volume by pressing VOLUME/SEARCH
(^)or (_).
³If the answering machine does not stop recording when you lift the handset, press (STOP).
Listening to Messages | Ò |
You can see the total number of recorded messages on the display. If the ANSWER indicator flashes, new messages have been recorded.
Listening to only new messages
Press (NEW\MESSAGE) briefly.
³The unit announces the number of new messages and plays them back. ³If there are no new messages, “No new messages” is heard.
Listening to all recorded messages
Press and hold (NEW\MESSAGE) until a short beep sounds.
³If there are no messages, “No messages” is heard.
To adjust the speaker volume (9 levels):
While using the answering system, press VOLUME/SEARCH (^) or (_).
³The display shows the volume level.
(STOP)
(NEW\MESSAGE) | VOLUME/SEARCH (^), (_) |
| (SKIP/FF) |
(REPEAT/REW)
14 | 15 |
