
Before Requesting Help
Problem | Remedy |
ProblemRemedy
The unit does not work. | ³Check the settings (p. |
| ³Unplug the AC adaptor to reset. |
| Plug in and try again. |
|
|
You cannot program function | ³Do not pause for over 60 seconds |
items, such as the dialling | while programming. |
mode. |
|
|
|
While programming or | ³To answer the call, lift the handset. |
searching, a telephone | Start again from the beginning after |
You cannot operate the answering system from a touch tone phone.
³Make sure to enter the correct remote code.
³The answering system may not respond if the tones are too short to activate the unit. Press each button firmly.
³The answering system is off. Turn it on (p. 29).
connected to the same line | hanging up. |
starts to ring and stops the |
|
program/search. |
|
|
|
The unit does not display the ³If the caller is not stored in the Caller
caller’s phone number whose | List, the unit will not display the caller’s |
message is being played. | information. |
|
|
The display goes to the | ³Do not pause for over 60 seconds |
while searching. | |
the Caller List. |
|
|
|
During message playback or | ³Press VOLUME/SEARCH (^) to |
monitoring a call, no sound is | increase volume. |
heard. |
|
|
|
Previously programmed | ³If a power failure occurs, programmed |
information is erased. | information may be erased. |
| Reprogram if necessary. |
|
|
The answering system is on, | ³Memory is full. Erase some, or all, of |
but incoming messages are | the messages (p. 17). |
not recorded. |
|
|
|
“Message full” is | ³Memory is full. Erase some, or all, of |
displayed, the ANSWER | the messages (p. 17). |
indicator flashes rapidly, and |
|
no new messages are |
|
recorded. |
|
While recording a greeting | ³To answer the call, lift the handset. |
message, a telephone | The recording will stop. Start again |
connected to the same line | from the beginning after hanging up. |
starts to ring and stops |
|
recording. |
|
|
|
During playback, a telephone ³To answer the call, lift the handset.
connected to the same line | To resume playback, press |
starts to ring and stops | (NEW\MESSAGE) after hanging up. |
playback. |
|
30 | 31 |