Panasonic KX-TM150ALB Erasing Messages, Listening to Messages, During playback

PQQX12356ZA-BM 01.3.22 3:56 PM y [ W 16

ÒListening to Messages

³During playback, the display shows which message is being played.

(Ex. While the first message is being played back, Message“ 1” is displayed.)

³At the end of the last message, “End of final message” is heard. The unit will announce the remaining recording time if it is less than

5 minutes.

³All recorded messages are saved until you erase them.

During playback

To repeat/	To repeat from the beginning of the message
rewind	Press (REPEAT/REW) briefly.
message	³If you press within 5 seconds of playback, the
	previous message will be played.

To rewind part of the message

Press and hold (REPEAT/REW) until you reach the desired place.

³At the beginning of the message, 3 short beeps will sound.

To skip/cue	To skip to the next message
message	Press (SKIP/FF) briefly.
	To cue to part of the message
	Press and hold (SKIP/FF) until you reach the desired
	place.
	³The message will be heard at twice the normal speed.
	³At the end of the message, 3 short beeps will sound.
To stop	Press (STOP).
operation	³To resume playback, press (NEW\MESSAGE).
	³If you do not press any button for 60 seconds or if you
	press (STOP) again, the unit will return to the stand-by
	mode.

For Caller ID service users (p. 19)

After listening to new incoming messages, “”√ will be added to the call entries in the Caller ID Caller List (p. 21).

Erasing Messages

The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New messages cannot be recorded when: —“Memory full” is heard.

—“Message full” is displayed.

—the ANSWER indicator flashes rapidly.

Erase some, or all, of the messages. We recommend you erase unnecessary messages after each playback.

Erasing a specific message

Press (ERASE) while the message you want to erase is being played.

³The unit erases the message.

³A short beep will sound and the unit will continue to play the next message.

Erasing all messages

All recorded messages, except the greeting message, can be erased at one time.

1	Press (ERASE).
	³“Press ERASE again to erase all
	messages” is heard.
2	Within 5 seconds, press
	(ERASE) again.
	³A beep sounds and
	“No messages” is heard.
	³The display shows
	“0 message”.
	³After the announcement, the
	display will return to the	(ERASE)
	stand-by mode.

³The information in the Caller List will not be erased. To erase the Caller List information, see page 24.

16 17