One-touch dialer
You can store up to 20 phone numbers in the
Note:
R If a phone number is stored in a
UPPER memory locations
Storing phone numbers
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3Enter a phone number up to 32 digits.
R If a pause is required for dialing, press MPAUSEN. A pause stored in a phone number counts as one digit.
R If a wrong number is entered,
press M
DIAL LOCK/EXITN and repeat step 2.
4Press a
R Status indicator light will turn OFF.
5When finished, hang up.
Note:
R We recommend you program an emergency number in the
MEMERGENCYN.
R Emergency number is number stored in the MEMERGENCYN that can be dialed even when dial lock (page 10)
or call restriction (page 15) is turned on.
Erasing a stored number
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3Press the
R Status indicator light will turn OFF.
4When finished, hang up.
Dialing a stored number
1Lift the handset or press
MSP-PHONEN.
R Status indicator light will turn ON after pressing
2Press the
3When you finish talking, place the handset on the cradle or press
MSP-PHONEN.
R Status indicator light will turn OFF after pressing
LOWER memory locations
Storing phone numbers
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3Enter a phone number up to 32 digits.
R If a pause is required for dialing, press MPAUSEN. A pause stored in a phone number counts as one digit.
R If a wrong number is entered,
press M
DIAL LOCK/EXITN and repeat step 2.
4MAUTO/LOWERN → Press a
R A long beep sounds.
12
