Making/Answering Calls
Note:
R The ringer indicator will flash when
–a telephone number is dialed using another phone which is in PULSE mode, or
–someone picks up or hangs up another phone connected to the same phone line.
This is normal.
Adjusting the unit ringer volume
You can select the ringer volume to HIGH, LOW or OFF. The default setting is HIGH.
OFF
HIGH
LOW
RINGER
Useful features during a call
Hold
This feature allows you to put an outside call on hold.
1Press MHOLD/MODEN during an outside call.
R If using the handset, you can place it on the cradle.
R Status indicator light will start flashing slowly.
R During the hold, both party will hear music.
2To release hold, lift the handset if the handset is on the cradle.
OR
Press MHOLD/MODEN if the handset is off the cradle.
OR
Press
Note:
R If another phone is connected to the same line, you can also take the call by lifting the handset.
To turn the music on/off
1Lift the handset.
2MPROGRAMN
R Status indicator light will start double flashing at an interval.
3MHOLD/MODEN → M4N
4To select ON, press M1N. or
To select OFF, press M2N.
5MPROGRAMN
R A long beep sounds.
R Status indicator light will turn OFF.
6When finished, hang up.
Mute
While mute is turned on, you can hear the other party, but the other party cannot hear you.
1During an outside call, press
MMUTEN.
R Status indicator light will start flashing quickly.
2To return to the conversation, press
MMUTEN.
R Status indicator light will stop flashing.
Flash
MFLASHN allows you to use the special features of your host PBX such as
9
