Connection

<Back view>

To a Switching Hub.

To a PC.

Optional AC adaptor (not included).

Clamp

AC adaptor

Headset

Recommended: KX-TCA86, KX-TCA92 Do not use a KX-T7090 headset.

For extra orders for the accessories, call toll-free: 1-800-332-5368

PC connection

Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.

For further information on the connection to a PC, refer to the documentation provided for the PBX.

Switching Hub connection

Use a straight CAT 5 (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.

AC adaptor

Use a Panasonic AC adaptor KX-A239 (PQLV206).

The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is located near the unit and is easily accessible.

CAUTION:

When connecting cables

Ensure that the Ethernet cables and the AC adaptor cord are clamped to prevent damage to the connectors.

Cables may be routed either upwards or downwards by using the appropriate cable clamp located on the back of the unit.

When connecting a headset and AC adaptor

Ensure that the headset cord and the AC adaptor cord are wound around the hook to prevent damage to the connectors.

10

Document Version 2008-05

Page 10
Image 10
Panasonic KXNT321 manual Connection, When connecting cables, When connecting a headset and AC adaptor