Wall Mounting Template
19Document Version 2008-05
Wall Mounting Template
83 mm (3-1/4 in)
100 mm (3-15/16 in)
for base unit
One screw here
One screw at either point
WALL MOUNTING TEMPLATE
1. Drive the screws into the wall as indicated.
2. Hook the unit onto the screw heads.
Note:
Make sure to set the print size to correspond with
the size of this page. If the dimensions of the paper
output still deviate slightly from the measurements
indicated here, use the measurements indicated
here.
NT321M_QRG.fm Page 19 Tuesday, January 15, 2008 4:51 PM