During a call: Timed Reminder Recall - Auto Dial Transfer

3.Press Transfer again or replace the handset before the extension answers. This starts the recall timer

Note: If the person to whom the call is transferred answers, the recall timer stops.

If the transferred call is not answered, your telephone rings:

1. Lift the handset or press a DN Key. You are connected to the original caller. The extension to which you transferred the call will continue to ring.

2.Press Transfer and repeat the transfer (to a different DN), if desired.

If the person to whom you are transferring the call answers while you are on the line, a conference call is set up between the three of you. Replace the handset or press Release to complete the transfer. Check with your system administrator about the length of your recall timer.

Auto Dial Transfer

Auto Dial Transfer allows you to use your Auto Dial Key to transmit digits to the central office after a Trunk Switchhook Flash. You must be on a central office/exchange (CO) trunk call from or to a CO which offers Centrex- or exchange line-type features.

To use Auto Dial Transfer when you pick up an incoming trunk call:

Trunk Switchook Flash

1. Press Trunk Switchhook Flash and

 

wait for interrupted dial tone.

2. Press Auto Dial to call the number desired.

3. Replace the handset or press Release to end the call.

32

Page 38
Image 38
Panasonic M2616 manual Auto Dial Transfer, Replace the handset or press Release to end the call