Panasonic M2616 manual Selectable Conferee Display and Disconnect, ºConf Display

To talk with more than one person: Conferee Display & Disconnect

Selectable Conferee Display and Disconnect

You can view the list of active conferees by using the Conferee Selectable Display key and disconnect any party that has been added to the conference call. This feature is not available on the MSL-100.

To view active conferees:

ºConf Display	1. While on a conference call, press the
	Conferee Selectable Display key. The
	LCD indicator ¼ turns on. With each
	key press, the screen changes to show
	a different active conferee.
	Note: This action has no effect on
	the displays of the other telephones
	involved in the conference.
¨	2. Press the Release key . If configured,
	the Conference Count Display returns.
	The LCD indicator ¼ turns off.
To disconnect a conferee:
ºConf Display	1. While on a conference call, press the
	Conferee Selectable Display key. The
	LCD indicator ¼ turns on. Continue to
	press the key until the conferee that is
	to be disconnected is displayed on the
	screen.
º 2637	2. Press the DN Key on which the
	conference call is established. The
	selected conferee is disconnected from
	the call.
ºConf Display	3. If there are additional conferees to be
	disconnected, press the Conferee
	Selectable Display key until the
	conferee that is to be disconnected is
	displayed on the screen.
¨	4. Press the Release key . If configured,
	the Conference Count Display returns
	and is updated to reflect the revised
	total count of conferees. The LCD
	indicator ¼ turns off.

46