During a call: Call Park

Call Park

Call Park allows a call to be held temporarily, then to be retrieved from any other DN. You can park an incoming call and then page the called party, without tying up a line. Your office may have a System Park DN where most calls are automatically parked.

If configured networkwide, Call Park can be used across networks.

To park a call on the System Park

Extension or your own DN:

¢Press Park twice. If there is a System Park

¢DN, the call is parked on it. Otherwise, it is parked on your DN.

Note: for MSL-100 Press Park once and the call is parked

To park a call on a DN other than the

System Park Extension or your own

DN:

¢1. Press Park.

2. Dial the DN.

¢3. Press Park again.

Note: MSL-100 uses Directed Call Park (DCPK)

To park a call using the SPRE code or FFC:

or ¿ 1. Press Transfer or Conference.

2. Dial the SPRE code followed by àÚ, or enter the Call Park FFC.

3. If you don't want the System Park Extension or your own DN, Dial a DN.

or ¿ 4. Press Transfer or Conference again.

Note: MSL-100 uses Conference only.

33

Page 39
Image 39
Panasonic M2616 manual Call Park, Or ¿ 1. Press Transfer or Conference, Or ¿ 4. Press Transfer or Conference again