18

D-9

D-10

D-11

Base support bars
Barres de support de la base
Barra de soporte de la base
Agitator assembly
Assemblage de l’agitateur
Ensamble del agitador
D - MAINTENANCE AND SERVICING

Brush Servicing

WARNING
Electrical Shock or Personal Injury Hazard
Disconnect electrical supply before performing
maintenance to the vacuum cleaner. Failure to do
so could result in electrical shock or personal injury
from vacuum cleaner suddenly starting.
D-9 TO CHECK BRUSHES:
When brushes are worn to the level of the base support
bar, replace the brush dowel.
TO REPLACE AGIT AT OR ASSEMBLY
Remove power nozzle cover, agitator cover, belt and
agitator assembly. (See “Power nozzle care”).
Replace agitator assembly.
Replace belt, agitator cover, power nozzle cover and
screws.

Replacing Headlight Bulb

D-10 Remove power nozzle cover.
Push in and turn bulb counterclockwise to remove.
Replace the bulb.
Only use a bulb rated 130 V AC-15 Watts.
Replace power nozzle cover.

FEATURES

D-11 Overload Protector
The overload protector stops the power nozzle motor
when the brush jams and prevents belt breakage.
NOTE: Canister motor will continue to run.
TO CORRECT PROBLEM:
Unplug electrical cord.
Check brush and brush support areas for excessive lint
build-up or jamming.
Clean jammed area.
TO RESET:
Press reset button on top of the power nozzle. Plug in
and turn on vacuum cleaner.