20
D-14
D-12
D-13
D-15
D - MAINTENANCE AND SERVICING
Maintaining the Pre-motor lter
Follow the procedure written below when the suction power is not
restored after replacing the dust bag.
D-12 Remove the pre-motor filter.
D-13 Wash gently with water and then allow to dry in a
shaded location.
D-14 Return the pre-motor filter to its original position.
NOTE: Make sure you remember to replace the filter.
If the filter is not installed, it will cause motor
failure.
Do not wash the filter in a washing machine or dry it
with a dryer or other source of hot air.

CAUTION

NEVER REUSE A DUST BAG.
Very fine materials, such as carpet freshener, face
powder, fine dust, plaster, soot, new carpet lint, etc.,
can clog the bag and cause it to burst before it is full
and may cause damage to vacuum cleaner motor.
Change bag more often when vacuuming these
materials.
DO NOT use hot air or hot surface to dry filters.
Keep at room temperature for approximately 24
hours.
• IMPORTANT: Before re-installing the washable filters,
make sure they are completely dry to
avoid damaging the cleaner.
Vacuum cleaner body
D-15 Wipe with a soft cloth soaked with water.