Replacing Belt
Lift Agitator Up |
Soulever l’agitateur |
Unidad del agitador |
Motor Shaft
Arbre d’entraînement du moteur
Eje del motor
Agitator
Agitateur
Agitador
➢Replace belt whenever a burning rubber smell caused by excessive belt slippage occurs.
➢Remove lower plate. See: “Removing and Installing Lower Plate”
➢Remove agitator by carefully lifting out.
➢Remove worn or broken belt.
➢Clean agitator. See: “Cleaning Agitator”
➢Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing.
End Cap |
Bouchon |
Tapa de |
extremo |
Groove |
Ouverture |
Ranura |
Groove |
Ouverture |
Ranura |
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure the belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate. See: “Removing and Installing Lower Plate”
- 32 -
