Agitator Assembly
|
| Brush |
|
| Brushes | Spacers (3) |
|
Agitator |
| Agitator tube | |
|
| Washer | |
Holder |
|
| |
|
| (optional) | |
|
|
| |
End Cap |
|
| Nut |
|
|
| |
|
| Agitator | End Cap |
|
|
| |
| Shaft | Pulley |
|
Split pin |
|
| |
|
|
| |
Replacing Brushes
Nut
Noix
Tuerca
Belt Pulley |
|
Poulie de |
|
la courroie |
|
Polea para | Agitator Holder |
correa | Support de l'agitateur |
| |
| Soporte del agitador |
Push Off |
| |
Pousser | Brush | |
Empuje hacia fuera | ||
Brosse | ||
| ||
| Cepillo |
➢When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced.
➢Remove lower plate and agitator.
➢Remove the nut from agitator shaft and end cap.
➢Do not bend agitator shaft or lose nut or washer.
➢Pull agitator shaft out of agitator body.
➢Pull, or pry out, agitator holder and agitator pulley.
➢Push each brush out of agitator body as shown.
➢Install new brushes by reversing procedure.
➢Reinstall agitator holder and agitator pulley completely.
➢Reinstall the agitator shaft, washer, end cap and nut.
➢See exploded view for correct assembly of parts.
➢Position belt over agitator pulley on the agitator.
➢Reinstall agitator and lower plate.
- 34 -
