| Replacing Belt | |
| ➢ Reinstall agitator back into nozzle | |
|
| housing grooves. |
| ➢ Close rear belt cover and reinstall | |
|
| agitator holder. |
Groove | ➢ | After reinstalling the agitator, turn it |
| by hand to make sure that belt is not | |
Ouverture |
| |
Ranura |
| twisted or pinched and that all |
End Cap |
| rotating parts turn freely. |
Bouchon |
|
|
Tapa de |
|
|
extremo | ➢ Reinstall lower plate. | |
| ||
Cleaning Agitator
➢ Clean agitator after every five uses and every time the belt is replaced.
➢ Remove lower plate.
➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors.
➢ Remove agitator.
➢ Remove any string or debris located on the end caps, washers or agitator shaft.
➢ Reinstall agitator and lower plate.
- 32 -
