Replacing Belt
Lift Agitator Up |
Soulever l’agitateur |
Unidad del agitador |
Motor Shaft
Arbre d’entraînement du moteur
Eje del motor
Slide Arch 
Arc glissant
Aarco deslizante
➢Replace belt whenever a burning rubber smell caused by excessive belt slippage occurs.
➢Remove lower plate. See: “Removing and Installing Lower Plate”
➢Remove agitator by carefully lifting out.
➢Remove worn or broken belt.
➢Clean agitator. See: “Cleaning Agitator”
➢Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing.
End Cap |
|
Bouchon |
|
Tapa de |
|
extremo |
|
Groove |
|
Ouverture |
|
Ranura |
|
Slide Arch |
|
Arc glissant |
|
Aarco deslizante | Groove |
| Ouverture |
| Ranura |
➢Reinstall slide arch into the agitator end cap.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure the belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate. See: “Removing and Installing Lower Plate”
- 34 -
