BEFORE REQUESTING SERVICE
WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
Review this chart to find
PROBLEM | POSSIBLE CAUSE | POSSIBLE SOLUTION | ||
|
|
|
| |
Vacuum cleaner | 1. Unplugged at wall outlet. | 1. | Plug in firmly. Push | |
will not run. |
|
|
| switch to ON. |
| 2. | 2. | Push | |
| 3. | Tripped circuit breaker/blown | 3. | Reset circuit breaker or replace |
|
| fuse at household service panel. |
| fuse. |
| 4. | Tripped thermal protector. | 4. | Unplug vacuum cleaner, wait thirty |
|
|
|
| (30) minutes, plug in and switch to |
|
|
|
| ON. |
|
|
|
| |
Poor job of dirt | 1. Full or clogged dust bag. | 1. | Change dust bag. | |
pickup. | 2. | Broken belt. | 2. | Replace belt. |
| ||||
| 3. | Clogged body or nozzle hose. | 3. | Clean body or nozzle hose area. |
| 4. | Body hose not inserted fully. | 4. | Insert body hose. |
| 5. | Worn agitator. | 5. | Replace agitator. |
| 6. | Hole in body or nozzle hose. | 6. | Replace body or nozzle hose. |
| 7. | Dust cover improperly installed. | 7. | Properly install dust cover. |
| 8. | Belt not installed on motor shaft. | 8. | Install belt on motor shaft. |
|
|
|
| |
Dust escapes | 1. Bag improperly installed. | 1. | Properly install bag. | |
the dust bag. | 2. | Bag torn. | 2. | Replace bag. |
| ||||
|
|
|
| |
Light will | 1. Burned out light bulb. | 1. | Replace light bulb. | |
not work. |
|
|
|
|
|
|
| ||
Bag holder does | 1. Secondary filter improperly | 1. Properly install secondary filter | ||
not assemble |
| installed |
|
|
properly |
|
|
|
|
|
|
|
|
|
- 40 -
