Cleaning Primary Filter
Dust Bin Lid
Couvercle du godet à poussière Tapa del compartimiento de polvo
Dust Bin Lid Latch
Loquet du couvercle
du godet à poussière Cierre de tapa del compartimiento de polvoDust bin lid latch
Primary Filter
Filtre primaire
Filtro primario
It is recommended to clean the filter with cold water at least every three (3) months. Check the primary filter frequently and clean when dirty.
➢Turn off and unplug the vacuum cleaner.
➢Remove dust bin (See EMPTYING DUST BIN, p. 34).
➢Pull the dust bin lid latch and open the lid.
➢Remove the primary filter.
➢Wash with cold water only, DO NOT use detergent or soap.
➢Once the filter is washed clean, squeeze by hand and allow to air dry.
➢Allow filter to dry for 24 hours before placing back into vacuum cleaner.
NOTE: When the cleaning of the filter no longer restores vacuum cleaner suction to full power, replace the filter.
DO NOT operate without primary filter installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
Primary Filter
Filtre primaire
Filtro primario
TO REPLACE FILTER
➢Place the primary filter into the dust bin lid.
➢Close the dust bin lid. Be sure the lid snaps in place. A noticeable “click” should be heard.
➢Reinstall the dust bin into the vacuum cleaner (See EMPTYING DUST BIN, p. 36).
- 40 -