Panasonic mc-v41500 3.7. Motor Protector Replacement

3.7. Motor Protector Replacement

1. Remove the seven (7) screws that secure the dust cover

and remove the dust cover.

2. Remove the motor protector located inside the dust com-

partment by pushing in on the two retaining tabs. Do one

side at a time while pushing out on the motor protector

from inside the dust compartment.

3. Once the motor p rotecto r has be en remo ved it c an be di s-

assembled for replacement of parts.

1. Reinstall the motor protector into the dust compartment

by align ing the two t abs under th e top fla nge with t he slo ts

in the dust compartment by applying pressure from the

back of the vacuum until it snaps into place.

2. Install the dust cover by first ensuring all wiring is routed

correctly so that no wires may be pinched during assem-

bly.

NOTE: For gen eral servicing, i t is ne ces sary to el im inate pinch-

ing of any wire during reassembly. After servicing any electrical

component or electrical enclosure, the unit should be reassem-

bled and checked for dielectric breakdown or current leakage.