Replacing Brushes
Card
Carte
Tarjeta
➢When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced.
➢Remove lower plate and agitator.
| |
| Bride en E |
| Sujetador |
| de E |
Agitator Shaft | Right End Cap |
Bouchon droit | |
Arbre d’entraînement | Tapa de extremo |
Eje del agitador | derecho |
| Agitator Holder |
Agitator Pulley | Support de l’agitateur |
Poulie de l’agitateur | Soporte del’agitador |
Polea para correa |
|
Push Off | |
Pousser | |
Empuje hacia Brush | |
fuera | Brosse |
| |
| Cepillo |
➢Remove the
➢Do not bend agitator shaft or lose E- clip.
➢Pull agitator shaft out of agitator body.
➢Pull, or pry out, agitator holder and agitator pulley.
➢Push each brush out of agitator body as shown.
➢Install new brushes by reversing procedure.
➢Reinstall agitator holder and agitator pulley completely.
➢Reinstall the agitator shaft, end cap and
➢See exploded view for correct assembly of parts.
➢Position belt over agitator pulley on the agitator.
➢Reinstall agitator and lower plate.
- 34 -