Panasonic MW-10 operating instructions Using the setup menu, Changing the dimmer, „ Setting items

RQT9522

18

Using the setup menu

„Basic operation

1.	Press [SETUP].	Settings Menu
		Image Quality Settings
2.	Press [e, r] to select the
		Clock/Calendar Settings
	item (¼below) and press
		Demo Mode
	[OK].	Remote Control Mode

3.Make the setting according to the on-screen instructions.

To return to the standard screen, press [ RETURN] a few times.

„Setting items

Factory settings are indicated with underlines.

	Select “Image Quality Mode” or
	“Adjust Brightness” in step 3 in
	the basic operation. And then
	make each setting.
	„Image Quality Mode
	Standard:
	Standard image quality
Image Quality	Soft:
	Eye-friendly image quality
Settings
	Dynamic:
	Vivid image quality with clear
	distinction of bright and dark
	„Adjust Brightness
	(Only when Dimmer is “Off”)
	Brightness is adjusted with the
	range from “1” to “10”. The default
	setting is “10”.
	Select Design ¼P9
	Set Clock ¼P9
Clock/Calendar	Set Date Indication:
	Select Month/Day/Year or Day/
Settings	Month/Year.
	Set Clock Indication:
	Select “12-hour System” or
	“24-hour System”.
Demo Mode	Disable/Enable
	For the Demo function ¼P8
	Change the remote control mode
	of this unit and remote control
	when malfunction occurs on
	this unit while using the remote
	control of other devices.
	Example: When setting the
Remote Control	remote control mode to 2
	1. Select “Remote Control 2” in
Mode	step 3 in the basic operation
	and press [OK].
	2. Press and hold [OK] on the
	remote control without aiming it
	at this unit, and press and hold
	the numbered button [2] for more
	than 2 seconds.
	3. Press [OK].
	This unit’s settings are returned to
	the factory defaults.
	1. Select “Yes” in step 3 in the
	basic operation and press [OK].
Initialize Settings	2. Select “Yes” again and press
	[OK].
	• The clock setting and photo files
	in the internal memory remain
	the same.

	1. Select “Yes” in step 3 in the
	basic operation and press [OK].
Format Card	2. Select “Yes” again and press
	[OK].
	• All the data on the SD card is
	deleted.
	Photo data in the internal memory
	is backed up to the SD card.
	Select “Yes” in step 3 in the basic
	operation and press [OK].
	• If [ RETURN] is pressed
	during backup and stopped,
Back Up Internal	photo data already backed up
	remains on the SD card.
Memory	• The “Favorite” settings, rotation
	or protection information of
	photos cannot be backed up.
	• Backup time will be longer
	depending on the number
	of photos to be saved or the
	amount of data. (Approx.
	10 minutes per 1000 files)
	1. Select “Yes” in step 3 in the
	basic operation and press [OK].
	2. Select “Yes” again and press
	[OK].
Format Internal	• Protected photos are also
	deleted.
Memory	• Even if you format the internal
	memory or delete all photos
	(¼P17), the size of used area
	of the internal memory will not
	become zero since the system
	uses some area.
	You can confirm the system
	software information (version) of
	this unit.
System Software Info	• For the latest version of
	information, see the following
	homepage.
	http://panasonic.jp/support/global/
	cs/audio/
	This is a function when updating
	the system software is necessary
	in the future to improve the
	performance.
	Please make sure to complete
Update System	user registration which is
	necessary to receive information
Software
	related to the system software
	update.
	For details, see the following
	homepage.
	http://panasonic.jp/support/global/
	cs/audio/

Changing the dimmer

Press [DIMMER].

Each time you press the button:

Off (normal) On

•Factory setting: Off

•The setting is saved even if the unit is turned off.