Panasonic MW-10 Listening to the radio, Listening to an iPod, 88.1 MHz, to this unit

Listening to an iPod

Shuffle	Press [PLAY MODE].
(only for music)	Each time you press
Tracks or albums are	Songs ˆ Albums ˆ Off
played at random.
Repeat	Press [REPEAT].
Normal/Shuffle	Each time you press
playback can be	One ˆ All ˆ Off
repeated.

Note

•For the album shuffle, the tracks in the album are played back in the proper order.

•If video is played back, the Shuffle setting may become “OFF”.

•When a play mode is switched, the track list display on the audio playback screen may be different from the tracks played back. If this occurs, select tracks from the track selection menu again.

„If the iPod with Shuffle/Repeat set is attached

to this unit:

Playback is performed with the same playback method. Also, even if the iPod is removed after the playback method is set on this unit, the iPod still keeps the same playback method.

“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

Listening to the radio

Adjust the frequency to listen (Manual Tuning)

1.Press [FM] or [AM].

•For the main unit, press [AUDIO SELECTOR] to select “FM” or “AM”.

2.Press [PLAY MODE] to select “Manual Tuning”.

3. Press [u/t, y/i] to	A
tune in the station you like.

A Lights up when signals are	FM
received.	88.1 MHz
B Lights up when the FM
stereo broadcast is	Manual	Stereo
received.

B

Press and hold [u/t, y/i] until the frequency indicator starts to run.

•Stops when the broadcast is received.

Automatic tuning	• If jamming is present in the
	surroundings during the
	automatic tuning, the broadcast
	may not be received and the
	frequency may stop.

•To stop the automatic tuning, press [u/t, y/i] again.

[g]

Stopping the radio To listen to the radio again, press

sound[FM] or [AM]. (For the main unit, press [AUDIO SELECTOR].)

„FM frequency step

The step is factory-set to 200 kHz, but you can change it to receive broadcasts allocated to 100 kHz steps.

1.Press [FM].

2.Press [PROGRAM].

3.Press [e, r] to select the “Frequency Step” and press [OK].

4.Press [e, r] to select the “100 kHz” or “200 kHz” and press [OK].

RQT9522

12