Advanced settings
The Setup Menu includes two mode levels, [Basic] and [Expert]; the [Expert] mode allows more advanced settings.
Audio1 A2 Video1 V2 | Language | General |
Preparations (Setup)
Digital output setting
★Digital output during DJ mode is automatically converted to linear PCM only.
This item allows selection of the kind of digital signals supported by the connected amplifier.
Setup Menu Mode | — Expert | |
Setup Navigator |
| Basic |
| ||
| ||
Parental Lock | — Off (us) | |
¶ If this item is set incorrectly, unwanted noise may be pro- duced.
English
Change menu mode |
|
Move | SETUP Exit |
Expert:
Displays advanced settings.
Basic:
Displays basic settings; simple explanations ( 
) are displayed for the items selected (factory default settings).
Adjusting Dolby Digital audio
★Digital output during DJ mode is automatically converted to linear PCM only.
This item allows adjustment of the dynamic range of digital sound. By adjusting the audio DRC (dynamic range compression), large- volume sounds can be attenuated and
¶See P.20 for menu instructions.
Audio1 | A2 Video1 V2 | Language General |
|
| Audio DRC | — Off |
|
| Dolby Digital Out | On |
|
| DTS Out | — Off |
|
| 96kHz PCM Out | — 96kHz 3 48kHz |
|
| MPEG Out — MPEG 3 PCM |
| |
Dynamic playback at low volume |
| ||
| Move | SETUP | Exit |
Off:
Cancels Audio DRC. Allows maximum audio presence when used with
On:
Suppresses loud sounds (explosions, etc.) making it easier to understand dialog.
¶Audio DRC is supported only when using Dolby Digital audio.
¶Some discs may produce less effect.
¶Audio DRC is also applied to audio produced from the digital output (coaxial) connectors. In this case, set [Dolby Digital Out] to [Dolby Digital 3 PCM], and set [Digital Out] to [On].
¶The effect produced with Audio DRC differs depending on the speakers used and the volume setting of the AV amplifier. Turn the setting ON/OFF while adjusting your sound volume so as to produce most effective results.
¶ Consult the Operating Instructions for your amplifier when making this setting.
¶ See P.20 for menu instructions.
Dolby Digital output
Set to [Dolby Digital 3 PCM] when the connected amplifier does not supports Dolby Digital audio.
Audio1 | A2 | Video1 | V2 | Language | General |
|
|
| Audio DRC | — Off | |||
| Dolby Digital Out | Dolby Digital | ||||
| ||||||
|
| DTS Out | Dolby Digital 3 PCM | |||
| 96kHz PCM Out | — 96kHz 3 48kHz | ||||
MPEG Out — MPEG 3 PCM
Change Dolby Digital output mode
Move | SETUP Exit |
Dolby Digital:
Setting for amplifier or decoders supporting Dolby Digital audio (factory default setting).
Dolby Digital 3 PCM:
Dolby Digital signals are converted to linear PCM for output. Se- lect this setting when the connected amplifier does not support Dolby Digital audio.
DTS output 
Set this item to [DTS] when the connected amplifier supports DTS.
Audio1 | A2 Video1 V2 | Language | General |
|
| Audio DRC | — Off |
|
|
| Dolby Digital Out | — Dolby Digital |
| |
| DTS Out | Off |
|
|
| 96kHz PCM Out | DTS |
|
|
| MPEG Out — MPEG 3 PCM |
| ||
Change DTS output mode |
|
| ||
| Move |
| SETUP | Exit |
Off:
Select this item when the connected amplifier does not support DTS (factory default setting).
DTS:
Select this item when the connected amplifier or decoder sup- ports DTS.
96 kHz PCM output 
Set this option to [96kHz] when the connected amplifier sup- ports 96 kHz output.
Audio1 | A2 | Video1 | V2 | Language | General |
| |
|
| Audio DRC | — Off | ||||
| Dolby Digital Out | — Dolby Digital | |||||
|
| DTS Out | — Off | ||||
| 96kHz PCM Out |
| 96kHz 3 48kHz | ||||
|
| MPEG Out |
| 96kHz | |||
Change 96kHz output mode | |||||||
|
|
|
|
|
|
|
|
| Move |
|
| SETUP Exit | |||
96kHz 3 48kHz:
96 kHz signals are converted to 48 kHz for output. Select this option when the connected amplifier does not support 96 kHz signals (factory default setting).
96kHz:
Select this option if the connected amplifier or decoder supports 96 kHz output.
21
<DRB1390> En
