Pioneer DVJ-X1 operating instructions Jog dial display, Rear panel

Before Operating (Names and Functions of Parts)

Jog dial display

30.Operation display

Displays play position, with one revolution equivalent to 135 frames. The display rotates during playback, and stops during pause.

31.Cue point position display

Displays the position of cue points.

32.Audio/video memory status display

Flashes during writing to the audio/video memory; lights steadily when writing is completed. While indicator is flashing, it may not be possible to record real time cue points or hot cue points.

33.Jog touch detector indicator

When VINYL mode is set to ON, this indicator lights when the top panel of the jog dial is touched.

34.VINYL mode indicator (Vinyl)

Lights when VINYL mode is set to ON.

31	32
30	33
	34	English

Rear panel

4 3 2 1

Y	CB PB	CR PR COMPOSITE
NORMAL
DJ
MODE
DIGITAL	AUDIO OUT	VIDEO OUT
OUT
SYNC IN	L	S
CONTROL
	R	S
		PREVIEW OUT

5 6 7 8 9 10

1.POWER OFF (—)/ON (_) switch

2.Main video output connectors (VIDEO OUT)

Includes RCA and BNC type connectors for outputting DVD playback video only (composite signals), as well as S-Video output connector.

3.Component video output connectors (Y, CB/PB, CR/PR) BNC type connectors for component signal output of DVD playback video only. Produces higher image quality than com- posite output.

4.Mode select switch (MODE NORMAL/DJ) (☞ P.14)

If this switch position is changed during playback, playback will stop, and then resume playback from the disc’s beginning. DJ: For jog dial, tempo variation and other DJ operations. During DVD playback, subtitles and some other functions, operations, or playback points may not be supported. NORMAL: DJ functions are not supported. Pause mode is silent, not audible. During DVD playback, selected audio sig- nals are output from the digital output connectors. During CD playback, digital data containing subcodes are output (does not support CD graphics).

5.DIGITAL OUT connector

RCA type coaxial digital output, for connecting AV amplifier, Dolby Digital/DTS decoder, CD recorder, etc.

When mode select switch (4) is set to “DJ”, during DVD playback the unit outputs 2-channel linear PCM digital data, regardless of the selected audio signal format. During CD playback, the unit outputs only audio data that do not include subcodes.

When mode select switch (4) is set to “NORMAL”, during DVD playback the unit outputs digital data in the audio signal format selected. During CD playback, the unit outputs digital data including subcodes.

6.CONTROL connector

Using the supplied accessory control cord, this connector can be connected to a Pioneer DJ mixer (DJM-600, DJM-500, DJM-300, DJM-909, DJM-707 or DJM-3000) to allow control of this unit from the DJ mixer. This facilitates the use of func- tions such as fader start play and back cue.

Alternately, linking this connector to another DJ player allows automatic relay play (☞ P.40).

7.SYNC IN connector

BNC type input connector for inputting external sync signal. Use to connect optional dedicated sync signal generator.

8.AUDIO OUT L,R connectors

RCA type analog audio output connectors.

9.Preview video output connectors (PREVIEW OUT)

RCA type connector (composite signals) and S-Video output connector. These connectors output monitor images used to aid the DJ during operation. Outputs various guide messages and displays (☞ P.12).

10.AC inlet

Use auxiliary power cord to connect to standard electrical outlet.

11

<DRB1390> En