Panasonic NE-2180C, NE-3280 manual Voltage selection 208V→

NE-3280 / NE-2180 / NE-2180C

Upper

Antenna

Motor

Lower

Antenna

Motor

PART NO.: ANE61446030AP (RATED: 120V)

PART NO.:

A6144-3280 (RATED: 120V)

11.9. Program, Beep and Program Lock switches board. (P.C.Board F assy)

1. Remove air filters.

2. Place the unit on its left side carefully.

3. Peel off panel B.

4. Remove 1 screw holding cover. (Figure)

5. Remove 2 screws holding switch assy.

6. Remove connector and remove 2 screws holding switch board.

11.10. Voltage selection (208V→ 230V)

1. Remove 1 screw holding voltage selection connector cover.

2. Plug the connector out from white (208V) socket and plug the connector into the black (230V) socket.

11.7.Replacement of temperature sensor (Thermal protector)

1.Cut 2 lead wires at the top of sensor terminals.

2.Remove 2 screws holding temp sensor and replace with new one.

3.Solder the lead wires securely to the sensor terminals.

11.8.Replacement of antenna motors (upper and lower)

1.The upper antenna motor may be removed by disconnecting the lead wire connectors and removing its 2 mounting screws.

2.To remove the lower antenna motor, carefully place the unit on its left side.

3.Remove the motor cover by removing 2 screws and follow same procedure as for upper antenna.

CAUTION

There are two types of antenna motors. Therefore please replace with correct one as showing below.

20