Panasonic NN-S454 Technical Specifications, Inside of the oven Glass Tray Outside oven surfaces

hhCarehof Your Oven

BEFORE CLEANING:

Remove plug from outlet. If impossible, leave oven door open to prevent oven from accidentally turning on.

AFTER CLEANING:

Be sure to replace the Roller Ring and Glass Tray in the proper position and press Stop/Reset Pad to clear the Display Window.

Inside of the oven:	Glass Tray:	Outside oven surfaces
Wipe with a damp cloth. Mild	Remove and wash in warm soapy	and back vents.
detergent may be used if the oven	water or in a dishwasher. If grease	Clean with a damp cloth.
gets very dirty. The use of harsh	accumulates, clean with a non-	To prevent damage to the
detergent or abrasives is not	abrasive nylon mesh scouring pad	operating parts inside the
recommended.	and a non-abrasive cleanser.	oven, water should not be
		allowed to seep into
		ventilation openings.

Control Panel:

•If it becomes wet, clean with a soft, dry cloth. Do not use harsh detergents or abrasives on the Control Panel.

Oven Door:		Roller Ring and oven cavity floor:
Wipe with a soft cloth when steam accumulates		Wipe the bottom surface of the oven with mild
inside or around the outside of the oven door.		detergent water or window cleaner and dry.
This may occur when the microwave oven is		Roller Ring may be washed in mild soapy
operated under high humidity conditions and in		water or dishwasher. These areas should be
no way indicates a malfunction of the unit or of		kept clean to avoid excessive noise and
microwave leakage.		scratching.
	Technical Specifications
		NN-S454
	Power Supply:	230 - 240 V
		50 Hz
	Power Consumption*:	1,000 W 4.5 A
	Power Requirement (Maximum):	1,650 W 7.4 A
	Output*:	1,100 W
	Outside Dimensions (H x W x D):	304 x 510 x 380 mm
	Oven Cavity Dimensions (H x W x D):	194.5 x 362x 356.5 mm
	Operating Frequency:	2,450 MHz
	Uncrated Weight:	Approx. 11.5 kg

*IEC Test Procedure

Specifications subject to change without notice.

– 15 –